More Details of Automatic Equipment

LJLQ-2500 Vertical Glass Washing and Drying Machine

Basic Working Principle

LJLQ-2500 glass washing and drying machine could wash max glass of 2500 mm*3500 mm, more large size and less size can be optional.
  • Self-Diagnosis system with touch screen on computer.
  • Stainless steel washer with 8 ( 6 ) brushes, soft brushes from MONFORTS of Germany, hard brushes automatically open when Low-E glass input.
  • Rotate speed of brush frequency control. (optional)
  • Stainless steel air knife is automatically adjustable according to glass thickness, Max thickness to 19 mm.
  • High speed cleaning ( max 14 m/min), Low noise ( max 70 dB), high availability working. (25 second /unit)
  • Automatic detection of Low-E glass and alarm for coating in reverse. (optional)
  • Structure stepped and three-layer I.G. unit available. (optional)
  • Precision of plate press: ±0.3 mm

Know More

Detailed Working Steps

Structural Characteristics
  • The glass washing machine could clean ordinary flat glass or coated glass with a thickness of 3~12mm; 
  • The cleaning area uses 3 pairs of brushes or optional 4 pairs of brushes (or imported soft brushes, coating or LOE special), two or four water cleaning; 
  • The machine adopts an inclined vertical structure, the flat glass is placed on the conveyor roller, passes through the feeding section, cleaning and drying section, and reaching the discharging section to complete the glass cleaning task; 
  • The cleaning area and the water tank are made of stainless steel and corrosion-resistant materials; the inclined wind knife with strong wind can dry the glass surface; 
  • The discharge section is equipped with inspection lamps to check the cleaning quality of the glass. The machine is easy to operate, and the operation buttons are concentrated on the operating table.

Know More

Technical Parameter

  1. Max glass size: 2000 mm*2500 mm
  2. Min glass size: 2500 mm*3000 mm
  3. Working direction facing the equipment
  4. Washing speed: 2-10 m/min
  5. Glass thickness: 3-15 mm
  6. Insulating glass thickness: ≤40 mm
  7. Water supply: 0.5 tons/day of circulating water, conductivity ≤40μS
  8. Washing speed: 2-10 m/min
  9. Working height: 580 mm
  10. Power: 3P 380V 50Hz
  11. Ambient temperature: 10°C-30°C, according to DIN 40040
  12. Relative air humidity: ≤ 75 %, according to DIN 40040

Know More

Technical Description

Benefits & Advantages

Configuration of three pairs of brushes
Six high temperature resistant wire brushes with diameter of 180 mm + four sprays, the glass is cleaned and the speed is fast (10-12 m per minute). The first brush is equipped with two bristles and is lifted by a cylinder.

Water rust and corrosion resistant

The parts and screws in the cleaning box that are in contact with water are made of stainless steel, copper, waterproof aluminum, nylon and other materials. They will not rust after long-term use and are easy to maintain.

High efficiency air knives

Two pairs of stainless steel air knives are equipped with high wind power and good drying effect, with heating system. The unique circulating windshield drying system is energy-saving and low-noise (the wind temperature can reach 40 degrees without heating in winter).

Stainless steel structure

The air-drying box glass support frame is uniformly welded by high-strength stainless steel, and the whole washing parts of glass washing and drying equipment will be used for a long time without rust and will not cause secondary glass pollution.

LJLQ-2500 Vertical Glass Washing and Drying Machine

Know More