Machine à laver le verre à vendre

The overall structure of the LJLQ-2000 vertical glass washing and drying machine is composed of four sections: inlet section, air-drying section, and outlet section. It is mainly composed of four major mechanisms: conveying, cleaning, strong wind, and inspection. It has the characteristics of strong decontamination ability, cleanliness, and good air-drying effect.

Know More

Caractéristiques structurelles

• Le rouleau brosse dans la partie nettoyage est véhiculé par une courroie indépendante du moteur. La brosse est fabriquée dans un matériau de haute qualité résistant aux acides et aux hautes températures, qui a un bon effet de nettoyage et une longue durée de vie.
• Il adopte un système de transmission précis et une régulation de la vitesse de conversion de fréquence, qui peuvent être actionnés directement sur le panneau pour ajuster arbitrairement la vitesse de nettoyage.
• Les rouleaux de transport en caoutchouc de haute qualité sont disposés de manière dense, ce qui peut traiter différentes tailles de verre. Combinée à la transmission par engrenage, la transmission en verre est plus stable.
• Grâce à un système efficace de nettoyage et de séchage à l'air, le verre de différentes épaisseurs peut être automatiquement nettoyé et séché ; il est nettoyé avec une brosse, séché avec un rouleau éponge de haute qualité, puis séché à l'air chaud une fois pour garantir que l'effet nettoyant du verre est propre et brillant sans laisser de traces de nettoyage.

Savoir plus

Paramètres:

1. Taille maximale du verre : 2000 mm x 2500 mm
2. Taille minimale du verre : 2500 mm x 3000 mm
3. Sens de travail face à l'équipement
4. Vitesse de lavage : 2-10 m/min
5. Épaisseur du verre : 3-15 mm
6. Épaisseur du vitrage isolant : ≤40 mm
7. Approvisionnement en eau : 0,5 tonne/jour d'eau en circulation, conductivité ≤40μS
8. Vitesse de lavage : 2-10 m/min
9. Hauteur de travail : 580 mm
10. Alimentation : 3P 380V 50Hz
11. Température ambiante : 10°C-30°C, selon DIN 40040
12. Humidité relative de l'air : ≤ 75 %, selon DIN 40040

Savoir plus

La machine à laver et à sécher le verre LJLQ-2500 peut laver un verre maximum de 2500 mm * 3500 mm, une taille plus grande et moins grande peut être facultative.

• Système d'autodiagnostic avec écran tactile sur ordinateur.
• Laveuse en acier inoxydable avec 8 (6) brosses, brosses douces de MONFORTS d'Allemagne, les brosses dures s'ouvrent automatiquement lors de l'entrée de verre Low-E.
• Faites pivoter la vitesse de la commande de fréquence de brosse. (optionnel)
• La lame d'air en acier inoxydable est automatiquement réglable en fonction de l'épaisseur du verre, épaisseur maximale jusqu'à 19 mm.
• Nettoyage à grande vitesse (max 14 m/min), faible bruit (max 70 dB), travail à haute disponibilité. (25 secondes /unité)
• Détection automatique du verre Low-E et alarme pour le revêtement en sens inverse. (optionnel)
• Structure étagée et unité IG à trois couches disponible. (optionnel)
• Précision de la presse à plaques : ±0,3 mm

Savoir plus

Caractéristiques structurelles

• La machine à laver le verre peut nettoyer le verre plat ordinaire ou le verre revêtu d'une épaisseur de 3 à 12 mm ;
• La zone de nettoyage utilise 3 paires de brosses ou 4 paires de brosses en option (ou brosses douces importées, revêtement ou spécial LOE), deux ou quatre nettoyages à l'eau ;
• La machine adopte une structure verticale inclinée, le verre plat est placé sur le rouleau du convoyeur, traverse la section d'alimentation, la section de nettoyage et de séchage et atteint la section de déchargement pour terminer la tâche de nettoyage du verre ;
• La zone de nettoyage et le réservoir d'eau sont en acier inoxydable et en matériaux résistants à la corrosion ; le couteau à vent incliné avec un vent fort peut sécher la surface du verre;
• La section de décharge est équipée de lampes d'inspection pour vérifier la qualité de nettoyage du verre. La machine est facile à utiliser et les boutons de commande sont concentrés sur la table d'opération.

Savoir plus

Paramètres:

1. Taille maximale du verre : 2000 mm*2500 mm
2. Taille minimale du verre : 2500 mm*3000 mm
3. Sens de travail face à l'équipement
4. Vitesse de lavage : 2-10 m/min
5. Epaisseur du verre : 3-15 mm
6. Epaisseur du verre isolant : ≤40 mm
7. Alimentation en eau : 0,5 tonne/jour d'eau en circulation, conductivité ≤40μS
8. Vitesse de lavage : 2-10 m/min
9. Hauteur de travail : 580 mm
10. Alimentation : 3P 380V 50Hz
11. Température ambiante : 10°C-30°C, selon DIN 40040
12. Humidité relative de l'air : ≤ 75 %, selon DIN 40040

Savoir plus

Benefits & Advantages

Configuration of three pairs of brushes
Six high temperature resistant wire brushes with diameter of 180 mm + four sprays, the glass is cleaned and the speed is fast (10-12 m per minute). The first brush is equipped with two bristles and is lifted by a cylinder.

Water rust and corrosion resistant
The parts and screws in the cleaning box that are in contact with water are made of stainless steel, copper, waterproof aluminum, nylon and other materials. They will not rust after long-term use and are easy to maintain.

High efficiency air knives
Two pairs of stainless steel air knives are equipped with high wind power and good drying effect, with heating system. The unique circulating windshield drying system is energy-saving and low-noise (the wind temperature can reach 40 degrees without heating in winter).

Stainless steel structure
The air-drying box glass support frame is uniformly welded by high-strength stainless steel, and the whole washing parts of glass washing and drying equipment will be used for a long time without rust and will not cause secondary glass pollution.



Know More

LJWBQJ1800 Machine horizontale de lavage et de séchage du verre utilisée pour la laveuse et la sécheuse des surfaces supérieure et inférieure du verre flotté ordinaire et du verre low-e de haute qualité, elle est composée d'un segment entrant, d'un segment de lavage à l'air et d'un segment sortant. Cette laveuse de type économique est toujours utilisée pour le traitement du verre simple ou du verre isolant déposé.

Savoir plus

Structural Characteristics

1. Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder；
3. The rubber roller is made of vulcanized rubber with stainless steel shaft；
4. The washing part in contact with water is made of stainless steel；
5. Cleaning department, wind staff overall lift, the maximum lift：350 mm,easy to clean and maintain；
6. Three pairs of brush（Ø 150 mm）Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning；
9. Main drive for gear transmission, frequency control, digital display, the rotation of the brush roller in the washing section is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable, the service life is long, realizes the cleaning high request special glass；
10. Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain；
11. Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner.
12. Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)

Know More

Item.	Spec.
Maximum glass width	2500 mm (effective maximum: 2650 mm)
Minimum glass specification	400 mm*400 mm (limited to single row on left and right sides)
Glass thickness	3 mm-25 mm (digital display)
Speed range	glass thickness within 3-25 mm V max=1-12 m/min
Main drive, brush speed regulation method	frequency control
Table height	900±25 mm
Total power	42 KW(water-bearing wind heating: 15 KW)
Water source	self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer)
Power source	380V 50Hz
Dimensions (length*width*height)	approximately 6260 mm*4800 mm*3100 mm
Weight	3940 kgs

Know More

Benefits & Advantages

The Imported Components
Using imported frequency converter and PLC control system, the speed of entering and exiting the glass can be adjusted freely, and the processing of clear glass can be maintained at a constant speed for a long time.

The 3 Pairs of Rubber Rollers
3 pairs of rubber rollers are used to press the glass sheets, which can achieve the effect of increasing the pressing strength in sequence, and the glass thickness tolerance is smaller than others suppliers.

The High-power Fan
The washing and drying equipment could be equipped with a high-power fan, the drying effect is better, and the cleaning effect of the glass is fully guaranteed.

The Gradient Pressing Method
According to the direction from the glass input to the output, the glass is gradually pressed by using a gradient pressing method. The pressing effect is better than other suppliers.


Know More

La machine à laver le verre horizontale automatique LJWQ-2500A se compose d'une section d'alimentation, de lavage, de séchage et de sortie. Pour obtenir de bonnes performances de lavage et un séchage rapide à l'air, il adopte 3 paires de brosses et 2 paires de couteaux à air avec 1 souffleur d'air. Il convient au verre trempé, au verre solaire, au verre feuilleté, au verre Low-e ou à tout autre traitement de verre plat.

Savoir plus

Structural Characteristics

• Horizontal structure, simple operation. The machine frame adopts heavy thickness aluminum alloy to avoid to be out of shape when working for a longtime.
• With stainless steel water sink and high pressure pre-spraying (high pressure pump) in loading ( in-feed), the rubber roller can pre-wash automatically to clean out the glass powder or scraps.
• Brush: The top and bottom brushes transmit by 1 motor respectively.
• Water tank (with heater):
• 2 water tanks total, 1 for pre-wash, another for washing section.
• Blower: Low noise and vibration.
• Conveying adopts frequent converter, digital display and convenient operation, which do good to connect with double edging line, hollow glass line, safety glass line, etc. Table rollers adapt superior rubber and transmitted by gear wheel which makes a stable working.
• Side covers and tanks and any other water touched material adopt stainless steel 201.
• Washing and Drying section can be lifted to Max. 400 mm by adjustment on electrical board with 4 legs(corners) increasing through motors and encoder.
• 2 pairs air knives adopt advanced technique device, large power and quick air dry.

Know More

Item.	Parameter.
Max. width	2500mm
Min. size	400*400mm
Glass thickness	3~28mm
Working table height	900mm±30mm
Blower power	22kw
Total power	32kw
Weight	3000kg
Dimension	5700*3300*2500mm
Low-e require	Yes
Water heater	Yes
Processing speed	0.5~12m/min
Processing-speed suggestion as follow:
4mm~8mm thickness, speed suggested to 8-12m/min
10mm~12mm thickness, speed suggested to 4~6m/min
15mm~19mm thickness, speed suggested to 2-3m/min
20mm and more, speed suggested to 0.5-1.5m/min

Item.	Spec.
Main machine frame	Aluminum alloy + steel, no deformation.
High pressure pump	China famous brand: Shanqing
Frequency converter of conveying	China famous brand: Kailida
Brush motor	China famous brand: Jinxing
Bearing	China famous brand: HRE
Electrical Appliance	Schneider
Rubber roller	NBR Perduran(sour liquid forbiddion), stainless steel 304 shaft
Water tank, sink, side covers, all parts touch water	Stainless steel 201
PLC	Siemens

Know More

Benefits & Advantages

The Aluminum Alloy Structure
The whole cleaning equipment adopts aluminum alloy assembled tripod, which is stable and durable, not easy to change. The surface of the aluminum alloy aluminum profile adopts negative oxidation treatment, which is not easy to be corroded by water.

The Water Tank Adopts #201 Stainless Steel
The water tank, the shield and the place in contact with the water are made of #201 stainless steel, which is harder than #304 stainless steel and contains high manganese. Chromium-rich oxides will be formed on the surface of the steel body to protect the steel body from water rust

The Gear Transmission
The equipment adopts gear transmission as a whole, and the transmission efficiency is high, generally η=0.94～0.99; the transmission ratio has a wide range, especially when planetary transmission is used, the transmission ratio can reach 100-200 (single-stage), which is suitable for deceleration or Speed-increasing transmission; reliable operation and long service life.

The Lifting System
The lifting system is driven by a servo motor, driven by a lifting screw, and combined with a gear drive. It has the characteristics of low friction loss, high transmission efficiency, and high axial rigidity. In addition, the starting torque of ball screw pair is Smaller, there will be no crawling phenomenon like sliding motion, and it can ensure the realization of precise micro-feed and high-speed feed.

The Rubber Roller Transmission
The feeding port and the discharging port of the equipment adopt frequency conversion transmission, and the operation screen is displayed for easy operation. The rubber roller is made of high-quality nitrile rubber, driven by gears, and runs smoothly. It can be connected with edging line, hollow line and laminated line for data connection and unified control.

The Imported PLC Control System
The PLC control system can be equipped with the Taiwan Delta or Germany Siemens control system according to the actual requirements of the customer. The PLC control system can be directly connected to the network, connecting the loading and unloading CNC robots to achieve a smart factory with integrated operation.



Know More