Automatische Ausrüstung für Isolierglas-Versiegelungsroboter
LIJIANG Glas
Weitere Details der automatischen Ausrüstung
Grundlegendes Arbeitsprinzip
- Nimmt Japan Yaskawa Servosteuerungssystem an, vollautomatisch und hocheffizient;
- Automatische Speicherfunktion, keine wiederholte Eingabe von Parametern erforderlich;
- Reparieren Sie Glasecken automatisch mit Schaber und Rolle;
- Der Förderabschnitt der Ausrüstung könnte in vier Abschnitte unterteilt werden, und Glas kann vorgelagert werden;
- Glasgröße und Glastiefe automatisch messen, Versiegelungsgeschwindigkeit anpassen;
- Zahnriemen, reibungslose Übertragung und genaue Position annehmen;
- Alle Automatikfunktionen sind manuell bedienbar;
- Könnte die Doppelverglasung, das geformte Glas, das Stufenglas, das Dreifachglas beschichten.
- Ein Satz Druckerhöhungspumpe steuert zwei Gruppen von Dichtungsmitteln;
- Automatische Timing-Dichtungsmittel-Entladefunktion;
- Das Dichtungsmittel-Mischsystem hat eine Anti-Blockier-Struktur und ist leicht zu reinigen.
Detaillierte Arbeitsschritte
Equipment preparation: a. Make sure the power connection of the sealing line is normal, and confirm that the required air source and glue supply system are working properly. b. Check whether all components and sensors of the sealing line are intact, and perform necessary maintenance and cleaning.
Set parameters: a. On the control interface of the sealing line, set relevant parameters, such as glass plate size, sealing speed, sealing width, sealing thickness, etc. Set parameters according to product requirements and process specifications. b. If using two-component glue, you need to set the glue ratio and mixing time.
Start the sealing robot equipment: a. Press the start button to start the sealing robot equipment. Ensure the safety of the insulating glass production line and wait for the sealing robot equipment to enter normal working conditions.
Automatic conveying of glass plates: a. Place the glass plate to be sealed on the conveyor belt or transmission mechanism to ensure that the position and positioning of the glass plate are accurate.
Automatic sealant sealing application: a. The sealing line will automatically apply sealant evenly to the edge of the glass plate or the parts that need to be sealed according to the set parameters. Ensure that the sealing robot equipment works stably and the glue is sprayed evenly.
Glass plate fixing: a. After the sealant is sprayed, the sealing line will fix another glass plate to be sealed on the glass plate that has been coated with sealant. Make sure the glass panels are aligned accurately and sealed tightly.
Sealant sealing and compression: a. The insulating glass sealing robot machine will perform a certain pressure treatment on the two glass plates to ensure a tight combination of the sealant and the glass plates. Set appropriate pressure and duration based on product requirements and equipment capabilities.
Set parameters: a. On the control interface of the sealing line, set relevant parameters, such as glass plate size, sealing speed, sealing width, sealing thickness, etc. Set parameters according to product requirements and process specifications. b. If using two-component glue, you need to set the glue ratio and mixing time.
Start the sealing robot equipment: a. Press the start button to start the sealing robot equipment. Ensure the safety of the insulating glass production line and wait for the sealing robot equipment to enter normal working conditions.
Automatic conveying of glass plates: a. Place the glass plate to be sealed on the conveyor belt or transmission mechanism to ensure that the position and positioning of the glass plate are accurate.
Automatic sealant sealing application: a. The sealing line will automatically apply sealant evenly to the edge of the glass plate or the parts that need to be sealed according to the set parameters. Ensure that the sealing robot equipment works stably and the glue is sprayed evenly.
Glass plate fixing: a. After the sealant is sprayed, the sealing line will fix another glass plate to be sealed on the glass plate that has been coated with sealant. Make sure the glass panels are aligned accurately and sealed tightly.
Sealant sealing and compression: a. The insulating glass sealing robot machine will perform a certain pressure treatment on the two glass plates to ensure a tight combination of the sealant and the glass plates. Set appropriate pressure and duration based on product requirements and equipment capabilities.
Technische Parameter
| Item. | Spec. |
| Max. Glass Size | 2000*3000 mm/2500*4000 mm/3300*7000 mm |
| Min. Glass Size | 400*300 mm |
| Glass Thickness | 12-56 mm/12-56 mm/12-80 mm |
| Working Speed | 5-40 mm |
| Air Pressure | 0.6-0.8 MPa |
| Squeeze Pressure | ＜35 MPa |
| Voltage | 380V 50Hz 3P |
| Power | 15 Kw/15 Kw/20 Kw |
| Overall Dimension（L*W*H） | 3700*2500*3000 mm/8700*2500*3500 mm/ 15000*2500*4300 mm |
| Weight | 4300 kg/5000 kg/7000 kg |
Technische Beschreibung
LJTJ2030/LJTJ2540 Automatische Isolierglas-Versiegelungsroboterausrüstung 2
