4 min read

The reasons for using too much glass anti-mildew powder and difficult to clean: Generally speaking, finished glass plates need to be packaged before storage after shipment. In order to prevent scratches and damage on the glass surface, there must be isolation between two adjacent pieces of glass when packaging. The isolation layer can also prevent the glass plates from being attracted together due to static electricity.

If glass products (such as flat glass and its processed products) are improperly stored and transported, they will be scratched or corroded (mold) due to the friction between the glass, which will affect the use of the glass and cause serious economic losses.

In addition, the "mold" phenomenon of glass during storage is caused by the condensation of moisture in the air on the surface of the glass, which severely stains the appearance of the glass. 

In order to prevent the glass from "molding", ordinary flat glass often uses a chemical release agent. The use of a mixture of acrylic microbead resin and acidic preservatives such as adipic acid can play a dual role in preventing scratches and corrosion. It is necessary to use acrylic microbead resin for isolation because the coated glass generally does not "mold", and acid preservatives will damage the coating on the glass surface. 

 Figure 1 The glass mildew powder 1

 Figure 1 The glass mildew powder 1

When using a glass washing machine to clean glass with too much anti-mold powder, the reason for not cleaning is that the anti-mold powder has too strong adsorption power, and suspended solids in the water will be deposited on the glass if it is not filtered out. Part of the glass production enterprises, while using the anti-mold powder, too pursued the adsorption of the anti-mold powder, leading to the phenomenon of unclean glass cleaning in the downstream glass deep processing industry.

If you want to wash the glass with a glass washing machine, Jinan Lijiang Automatic Equipment Co,.Ltd  , as a professional glass deep processing equipment manufacturer, can give you some suggestions for reference only:

1. Wash the glass with this kind of problem first with cleaning equipment and cleaning agent to ensure that this batch of glass can go through the next glass processing process normally.

2. When cleaning the glass with anti-mold powder added multiple times in the later period, pay attention to whether the sponge suction roller is replaced in time. Sometimes the sponge roller has been used for a long time and does not have the original water absorption effect, so it needs to be cleaned several times before it is cleaned.

3. In addition, increase the amount of water used in the precipitation process, use pure water, use secondary water precipitation filtration, avoid multiple uses of water in the water tank for recycling, and choose a plate brush glass cleaning machine, which will also be your good cleaning choice. 

If you want to use the glass washing machine to clean glass with a lot of anti-mold powder, generally speaking, it is necessary to increase the configuration of the glass washing machine (such as replacing six brushes, double water tanks, double cleaning, double sponge rollers, etc.), the configuration of the glass washing machine is selected After high, the sponge roller and brush do not need to be replaced. As long as the glass can be cleaned and dried at one time, it is a good glass washing machine. 

Figure 2 The glass mildew powder 2

Figure 2 The glass mildew powder 2

Talking about the brush roller of glass washing machine, in the previous article, we introduced HOW MUCH DO YOU KNOW THE BRUSH ROLLER OF GLASS WASHING MACHINE? and also, if you are interested in the brush rollers of glass washing machines, please click here or find our past articles by yourself to learn more brush roller knowledge.

Figure 3 The Jinan LIJIANG Vertical Glass Washing Machine

Figure 3 The Jinan LIJIANG Vertical Glass Washing Machine 

Figure 4 The Jinan LIJIANG Horizontal Glass Washing Machine

Figure 4 The Jinan LIJIANG Horizontal Glass Washing Machine

When the glass washing machine is cleaning the anti-mildew powder glass, whatever you could use the vertical glass washing machine and horizontal glass washing machine,  it needs to be equipped with top equipment or replace the brush sponge roller. When the glass goes through the cleaning process, the glass is seriously not cleaned, and there is a large area of anti-mildew powder on the surface of the glass, causing the glass to be fresh Wash the film many times to wash the film cleanly, and this problem is particularly prominent for glass with relatively large specifications. 

If the surface of the glass has been moldy due to long storage time and poor storage conditions, it is actually difficult to clean it with a common washing machine. In addition, the glass needs to be polished before washing and drying.


For more information about Jinan LIJIANG Glass insulating glass processing equipment and insulating glass processing accessories, please click here to learn more. 

Comments
* The email will not be published on the website.