The electric glass handling suction cup car, it can realize electric walking without an external air source or power supply during the using. It has functions such as electric lifting and lowering, electric suction and deflation, manual rotation 360°, and manual flip 90°. The suction cup car comes with a vacuum pressure supplement system to ensure that the vacuum system maintains a relatively constant safe pressure value during the entire glass handling process. After an accidental power failure, the pressure maintenance function can prolong the emergency processing time and ensure safe use.
LIJIANG Glass LJTB03 insulating glass butyl extruder machine is used for spreading aluminum spacer frames evenly with hot melt butyl, would use large electrical control panel which makes the operation more easier. The conveyor of aluminum is controlled by frequency converter, and the speed can be adjusted from 0m/min to 47m/min, which has the fastest speed in China. More cheaper and more cost-effective than LJTB01 insulating glass butyl extruder machine.
The LJ6030-A Automatic Tempering Glass Equipment heats the flat glass and then quenches it, so that the surface layer of the cooled glass forms compressive stress and the inside of the glass form tensile stress, to improve the strength of the glass and make ordinary annealed glass into tempered glass.
LJLQ01 Vertical Glass Washing and Drying Machine could wash max glass of 2500 mm*3500 mm, which machine is suitable for deep processing of small format glass, more large size and less size of flat glass washing could be optional.
LJLQ-1600 Vertical Glass Washing and Drying Machine could wash max glass of 1600 mm * 2200 mm, which machine is suitable for deep processing of small format glass, more large size and less size of flat glass washing could be optional.
LJ-LED Insulating Glass Edge Light Detector Equipment is designed according to the requirements of the international standard "Flat Glass" and is an auxiliary equipment for detecting the appearance defects of flat glass. At the same time, it is also suitable for the appearance defect detection of tempered glass, insulating glass, laminated glass, automobile glass and other glass...
LJ-5 Insulting Glass Dew Point Detector Equipmentis a special instrument designed and manufactured according to the revant international standard "Insulating Glass", which is used to detect the dew point performance of insulating glass.
LJ-F Insulating Glass UV Irradiation Detector is designed and manufactured according to the technical requirements of the relevant industry international standard <Insulating Glass>, which is used to test the UV radiation resistance of insulating glass.
To improve the phenomenon that the thermal resistance of the surrounding part of the insulating glass is too small, and it is easy to condense and frost, what plastic material is used for the warm edge of the insulating glass. Jinan LIJIANG special plastic granules for insulating glass warm edge strips are lightweight and environmentally friendly, with good performance...