Glass products are widely used in our lives. In its production and processing, attention must be paid to the correct selection and use of polishing abrasives during the polishing of the glass edge. According to the type and model of the glass edging machine used to determine the type of polishing abrasive.
For the same type of glass edging machine, due to the difference in quality and accuracy, the polishing effect and service life of the polishing abrasive will be different. In addition, check whether the diamond rough grinding wheel and fine grinding wheel used are suitable. If the diamond grit of the rough diamond grinding wheel and the Jingshe grinding wheel is too coarse, it is difficult for the polishing abrasive to completely discard the grinding marks of the diamond grinding wheel, which will affect the consumption of the polishing abrasive and reduce its service life.
According to the processing requirements of the glass edge, that is, the brightness requirements, select and use suitable polishing abrasives to meet the processing requirements, reduce production costs, and improve production efficiency.
Several requirements for glass polishing abrasive applications 1
It is necessary to comply with the grinding and polishing specifications. The polishing abrasive should be carefully checked for cracks before installation; during installation, a flange with a diameter not less than one-third of the diameter of the polishing abrasive should be used for fastening; the use speed of the polishing abrasive should not exceed Regulations for safe working line speed; polishing abrasive tools that are not specifically used for end face work, and it is forbidden to work with the end face of the abrasive tool; the flow of cooling water must be sufficient; the operation must be carried out in accordance with the safe operating rules of the edge grinding machine, and the appropriate head work must be selected The pressure and the glass and the traveling speed are long; during storage, the polishing abrasive tools should be protected from freezing and damp, and it is not suitable to contact with alkalis, otherwise the strength and polishing ability of the polishing abrasive tools will be affected.
Disclaimer: The above views do not represent the position of Jinan LIJIANG Glass, and the copyright belongs to the original author and source. The content of News is the author's personal opinion, and it does not mean that Jinan LIJIANG Glass agrees with his opinion and is responsible for its authenticity. Jinan LIJIANG Glass only provides references and does not constitute investment and application advice.