LIJIANG Glass Manual Glass Suction Cups and Suckers

Application of this product in production

Vacuum pumps, vacuum generators, vacuum suction cups and a complete set of vacuum equipment have been used in industrial production. The vacuum spreader uses vacuum as a medium to absorb workpieces with suction cups. The workpiece will not be damaged by clamps, pliers and hooks. Tons to 30 tons of heavy objects are completely handled by one person.

More advantage

1. Non-destructive handling
2. High security
3. Early warning
4. Simple operation
5. High applicability
6. Versatility
7. Mechanical equipment replaces manpower to maximize labor productivity.
8. Could work and handle at high temperature, such as ordinary silica gel 150 ℃, imported silica gel 200 ℃, special silica gel 300 ℃. , can also be used at low temperature -60 ℃

Scope of application

Glass or tile surfaces should be clean, even if the surface is free of oil, water, or holes.

Equipment parameters

How to use the glass suction cups 

The Jinan LIJIANG manual glass suction cups could be sucked on flat glass. When in use, push the glass loading table equipment to the front of the glass stacking rack to be taken, make the long side of the equipment parallel to the glass, as close as possible to the centerline of the glass, turn on the power supply and air source, and operate the suction cup on the flip arm. The plane is parallel to the glass surface to be taken. Press and hold the button and the device will move forward. Under the action of vacuum, the suction cup drives the glass to move backward and separate from the front glass. When the vacuum reaches the set four-bar action, the glass is lifted, the lower part of the glass is separated, and the glass transportation can be completed.